|
Product Details:
Payment & Shipping Terms:
|
Model Number: | GAG-5152 | UV Wavelength: | 320-400um(UV-a), 280-320um(UV-B) |
---|---|---|---|
Lamp Power: | 40W/Unit, 8PCS For Unit Chamber | Outer Chamber Size: | 500*1300*1480mm |
Temperature Range: | 40c -70c | Temp Range: | Rt+10°c ~70°c |
Humidity Range: | 10%~95%R.H | Power: | Electronic |
High Light: | quality control lab equipment,laboratory testing machines |
ISO ASTM Standard Light Fastness UV Exposure Aging Test Chamber For Environmental Climatic Accelerated Weathering Testing
Description
UV aging test Chamber is designed for evaluating the resistant performance of non-metallic materials, organic materials (plastics, paints, coatings, rubbers, etc.) under the specified conditions such as sunlight, temperature, and other climatic conditions. It creates a man-made testing environment imitating the natural light source such as sunlight and other damages in the nature, such as rain and dew damage, to impose on the materials and to assess the degree of color changing and fading under the accelerated environment conditions. The chamber fully complies with the requirements of Standard GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTMG53 and etc., provides the best UV sunlight simulation and is easy to use and operate.
Specifications
Model | GAG-5152 (Case-type) |
GAG-5152 -1 (Tower-type) |
Inner size | W1170*H450*D500mm | W1170*H450*D500mm |
Inner size | W1350×H1480×D650mm | W1300 X H1450 x D550mm |
Temperature range | RT~70°C | |
Temperature uniformity | ±1°C | |
Temperature fluctuation | ±0.5°C | |
Testing time | 0~999H, adjustable | |
Materials | Inside and Outside SUS#304 stainless steel | |
Humidity range | ≥90%RH | |
Controller |
Programmable controller (Both in Chinese and English), LCD touch screen |
|
Lamp power | 40W/Piece | |
Test cycle setting | Illumination, condensation and water spray test cycle is programmable | |
Irradiance | 1.1W/cm2 | |
Ultraviolet light | UV-A: 315-400nm; UV-B: 280-315nm (8pcs, 1600h lifetime); 8 pieces of Atlas Lamp, length: 120cm | |
Distance between lamps | 35±2mm (adjustable) | |
Distance from samples to lamp | 50±2mm (adjustable) | |
Center distance between the lamp | 70mm±15mm | |
Standard Specimen Size (for tower-type only) | 75×150mm or 75×290mm (special requirements to be described in the contract) | |
Required water depth for water channel | 25mm, automatically control | |
Protection system | Overload short circuit protection, over temperature protection, water lack protection, Earth leakage protection, Auto shut off protection | |
Power | 220V/50Hz /±10% 4.5KW |
Features
UV test chamber is equipped with fluorescent UV lamp which can
simulate the UV spectra of sunlight, exposes materials to alternating
cycles of UV light, moistureand temperature at controlled.
It simulates dew and rain with condensing humidity and/or water spray.
1. Specimen Holders
1.1 Flat Specimen Holders, aluminum panels with rings.
Each specimen size is 75mm * 150mm, can hold 40 pieces of specimens
1.2 Special Specimen Holder
Customize special holder according to different specimens.
2. Control Panel
2.1 Programmable color touch display controller which control temperature,
humidity, water spraying, and irradiance.
Controller shows 8 pieces of UV lamp working time.
3. Water Spray & Water Supply
3.1 Total 6 water spray nozzles, 3 nozzles each side.
3.2 Automatic water supply
3.3 Water reservoir is 50 Liter.
4. Sensors:
4.1 Temperature sensor PT-100 A class
4.2 Resolution: ± 0.01 ºC
4.3 Humidity sensor Dry and wet bulb sensors
4.4 Resolution: ± 1%RH
4.5 UV Irradiance Radiometer
5. UV Lamp:
5.1 Chamber equipped with 8 pieces of UV lamp, which is air cooling.
5.2 1 of UV Lamp Power is 40W,
5.3 Lamp length: 1160mm
5.4 UV lamp service life is 1200hours.
5.5 Over 1200 hours, must changenew lamp.
6. Safety Protection:
6.1 Humidifier dry-combustion protection
6.2 Independent over-temperature protection,
6.3 Water shortage protection
6.4 Over-current protection
6.5 Earth leakage protection
Standard
1. ISO 48-3-2006, Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps;
2. ASTM D4329-2005, Standard Practice for Fluorescent UV Exposure of Plastics;
3. ASTM D4587-2005, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings;
4. ASTM D5208-2001, Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics, etc.
Applicable Industries
The Test Chamber is the world's most widely used weathering tester to test types of damages include color change, gloss loss, chalking, cracking, crazing, hazing, blistering, strength loss and oxidation. This series is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources.
Application: paints, coating & inks, plastic, printing package, aluminium material, adhesive, auto & motorcycle, cosmetic, metal, electronic, electroplate, pharmaceuticals and so on.